[1]王 宁,安菲斐,韩 蕾,等.3D打印技术辅助Salter骨盆截骨术治疗儿童发育性髋关节脱位疗效及对髋关节形态和功能恢复的影响[J].陕西医学杂志,2023,52(11):1517-1520.[doi:DOI:10.3969/j.issn.1000-7377.2023.11.014]
　WANG Ning,AN Feifei,HAN Lei,et al.Efficacy of 3D printing technology supplemented with Salter pelvic osteotomy in treatment of DDH in children and its influence on hip joint morphology and functional recovery[J].,2023,52(11):1517-1520.[doi:DOI:10.3969/j.issn.1000-7377.2023.11.014]
点击复制

3D打印技术辅助Salter骨盆截骨术治疗儿童发育性髋关节脱位疗效及对髋关节形态和功能恢复的影响
分享到：

《陕西医学杂志》[ISSN:1000-7377/CN:61-1281/TN]

卷:
52
期数:
2023年11期
页码:
1517-1520
栏目:
临床研究
出版日期:
2023-11-05

文章信息/Info

Title:
Efficacy of 3D printing technology supplemented with Salter pelvic osteotomy in treatment of DDH in children and its influence on hip joint morphology and functional recovery
作者:
王 宁; 安菲斐; 韩 蕾; 严亚波
(空军军医大学西京医院骨科,陕西 西安 710032)
Author(s):
WANG Ning; AN Feifei; HAN Lei; YAN Yabo
(Department of Orthopaedics,Xijing Hospital of Air Force Medical University,Xi'an 710032,China)
关键词:
发育性髋关节脱位;  3D打印;  Salter骨盆截骨术;  髋关节功能;  临床疗效;  髋臼指数
Keywords:
Developmental dislocation of the hip;  3D printing;  Salter pelvic osteotomy;  Hip function;  Clinical effect;  Acetabular Index
分类号:
R 687.4
DOI:
DOI:10.3969/j.issn.1000-7377.2023.11.014
文献标志码:
A
摘要:
目的:探究3D打印技术辅助Salter骨盆截骨术治疗儿童发育性髋关节脱位(DDH)疗效及对髋关节形态和功能恢复的影响。方法:选择接受3D打印技术辅助Salter骨盆截骨术治疗的DDH患儿46例纳入观察组,同期接受常规Salter骨盆截骨术治疗的DDH患儿50例纳入对照组。记录两组手术时长、术中出血量、术中透射次数、住院费用,比较两组治疗4个月后临床效果(Mckay临床评定标准),对比治疗前、治疗4个月后两组髋关节功能[日本骨科协会髋功能评分(JOA)]、影像学指标[髋臼指数(AI)、中心边缘角(CEA)、头臼指数(AHI)]的变化。结果:观察组患儿手术时长显著短于对照组,术中出血量、术中透射次数显著低于对照组,治疗有效率显著高于对照组(均P<0.05),两组住院费用比较无统计学差异(P>0.05)。治疗4个月后,两组CEA、AHI、JOA评分均显著升高,且观察组高于对照组(均P<0.05),AI均显著降低,且观察组低于对照组(P<0.05)。结论:3D打印技术辅助Salter骨盆截骨术治疗儿童DDH的疗效显著,能实现髋关节精准复位,显著改善患儿的髋关节功能。
Abstract:
Objective:To explore the effects of 3D printing technology supplemented with Salter pelvic osteotomy in the treatment of developmental dislocation of the hip(DDH)in children and its influence on the hip joint morphology and functional recovery.Methods:The clinical data of children with DDH who received 3D printing supplemented with Salter pelvic osteotomy were retrospectively analyzed,and 46 cases were randomly selected and included in observation group.The clinical data of children with DDH who received conventional Salter pelvic osteotomy during the same period were retrospectively analyzed,and 50 cases were randomly enrolled as control group.The surgical duration,intraoperative blood loss,intraoperative transmission frequency and hospitalization cost in the two groups were recorded,and the clinical effect(Mckay clinical evaluation criteria)after 4 months of treatment,and hip joint function(Japanese Orthopedic Association [JOA]hip function score)and imaging indicators(Acetabular Index [AI],center edge angle [CEA],Acetabular Head Index [AHI])before treatment and after 4 months of treatment were compared between the two groups.Results:The surgical duration in observation group was significantly shorter than that in control group,and the intraoperative blood loss and intraoperative transmission frequency were significantly less than those in control group,and the effective rate of treatment was significantly higher than that in control group(allP<0.05),but there was no significant difference in hospitalization cost between the two groups(P>0.05).After 4 months of treatment,the CEA,AHI and JOA scores in both groups were significantly increased,and the indicators in observation group were higher than those in control group,and the AI was significantly decreased,and the AI in observation group was lower than that in control group(all P<0.05).Conclusion:3D printing technology supplemented with Salter pelvic osteotomy has a significant efficacy,and it can achieve accurate hip joint reduction and significantly improve the hip joint function in children with DDH.

参考文献/References:

[1] 黎艺强,刘 行,郭跃明,等.儿童发育性髋关节脱位闭合复位术后髋关节恢复正常X线表现影响因素的多中心回顾性研究[J].中华小儿外科杂志,2021,42(2):118-125.
[2] 吕海港,李 潞,赵 欣,等.术中亚麻醉剂量氯胺酮在发育性髋关节脱位截骨矫形术超前镇痛中的应用[J].陕西医学杂志,2021,50(2):166-169.
[3] 韦志明,凡一诺,方汉军,等.小儿先天性髋关节脱位的治疗方法及其常见并发症的研究进展[J].中国骨与关节损伤杂志,2022,37(6):663-665.
[4] 田 震,刘秋亮,史龙彦,等.手术间隔时间对分期治疗双侧发育性髋关节脱位疗效的影响[J].郑州大学学报:医学版,2022,57(5):684-688.
[5] 戴建东,张志余,李 洁,等.婴儿发育性髋关节脱位的早期筛查与治疗效果观察[J].实用医院临床杂志,2022,19(6):21-23.
[6] 李大进,秦海辉,高 强,等.18～24月龄Tonnis Ⅲ、Ⅳ度发育性髋关节发育不良的手术疗效分析[J].中国临床研究,2022,35(10):1376-1381.
[7] 庞浩田,王亦维,范民杰,等.三维打印个体化手术导航模板在发育性髋关节发育不良手术中的应用[J].中华小儿外科杂志,2022,43(4):365-372.
[8] 毕文超,梁立卓,刘司南.基于快速成型及3D打印技术全膝关节置换术治疗双膝骨性关节炎临床研究[J].陕西医学杂志,2022,51(6):688-691.
[9] 孙德立,肖 毅.发育性髋关节脱位诊断与治疗[M].济南:济南出版社,2002:206-207.
[10] 王树辉,张 青,尹同珍,等.骨盆Salter截骨联合股骨截骨治疗儿童发育性髋脱位[J].临床骨科杂志,2019,22(6):675-677.
[11] 周晓宇,胡晓云.人位石膏固定术后可调节支架在发育性髋关节发育不良患儿治疗中的应用[J].川北医学院学报,2022,37(11):1414-1417.
[12] 何 苗,孛立甲,曹志欧,等.麻黄附子细辛汤配合缪刺法治疗腰椎间盘突出伴坐骨神经痛疗效及对VAS评分、JOA评分及炎症因子的影响[J].现代生物医学进展,2022,22(13):2530-2534.
[13] 潘 蕾,张中礼,张 涛,等.天津市婴儿发育性髋关节发育不良的筛查结果及危险因素分析[J].中华骨科杂志,2022,42(9):570-578.
[14] 刘永裕,徐景利,林天烨,等.Salter骨盆截骨及植入物内固定治疗儿童发育性髋关节脱位的中长期随访[J].中国组织工程研究,2021,25(15):2380-2384.
[15] 字绍能,徐小山,陈苏丽,等.联合截骨术治疗大龄儿童复杂发育性髋关节脱位[J].中国骨与关节损伤杂志,2022,37(12):1336-1337.
[16] 平 凡,许丽琴,邱雯君.学龄期儿童发育性髋关节脱位手术治疗创伤后成长现状及影响因素研究[J].浙江医学,2021,43(24):2652-2657.
[17] 李大进,张 彬,高 强,等.股骨截骨联合Salter骨盆截骨治疗残余髋臼发育不良的疗效分析[J].临床小儿外科杂志,2022,21(12):1159-1163.
[18] 朱 宇,高延征,王红强,等.计算机辅助截骨及3D打印导板在骨盆Salter截骨术中的应用[J].中华小儿外科杂志,2021,41(14):938-946.
[19] 詹恋胜,陈金武,徐显志.3D打印技术辅助肩峰前外侧入路手术治疗Neer 3、4型肱骨近端骨折的疗效[J].实用临床医药杂志,2023,27(6):6-11.
[20] 李克伟,戎 帅,滕 勇,等.3D打印技术辅助下儿童DDH手术疗效分析[J].中国矫形外科杂志,2020,28(9):846-848.
[21] 杨 鑫,荔志云.3D打印技术在神经外科临床治疗中的应用进展[J].海南医学,2022,33(19):2564-2567.
[22] 字绍能,徐永清,徐小山,等.3D打印下Tonnis三联截骨治疗儿童发育性髋关节发育不良的疗效分析[J].局解手术学杂志,2022,31(12):1072-1077.
[23] 王儒法,徐 鹏,郑朋飞,等.3D打印技术辅助髋臼成形术治疗脑瘫儿童髋关节脱位[J].中国骨伤,2022,35(6):572-577.
[24] 李 杰,白德明,龙江涛,等.3D打印技术在儿童发育性髋脱位骨盆截骨运用中的临床研究[J].中国药物与临床,2020,20(13):2221-2223.

相似文献/References:

[1]毕文超,梁立卓,刘司南.基于快速成型及3D打印技术全膝关节置换术治疗双膝骨性关节炎临床研究[J].陕西医学杂志,2022,51(6):688.[doi:DOI:10.3969/j.issn.1000-7377.2022.06.011]
　BI Wenchao,LIANG Lizhuo,LIU Sinan.Clinical study of TKA based on rapid prototyping and 3D printing in treatment of bilateral knee osteoarthritis[J].,2022,51(11):688.[doi:DOI:10.3969/j.issn.1000-7377.2022.06.011]
[2]杨 洋,林生荣,胡 青,等.3D-CTBA联合3D打印技术在肺癌胸腔镜肺段切除术中的应用价值[J].陕西医学杂志,2023,52(9):1221.[doi:DOI:10.3969/j.issn.1000-7377.2023.09.025]
　YANG Yang,LIN Shengrong,HU Qing,et al.Application value of 3D-CTBA combined with 3D printing technology in thoracoscopic segmentectomy of lung cancer[J].,2023,52(11):1221.[doi:DOI:10.3969/j.issn.1000-7377.2023.09.025]

备注/Memo

备注/Memo:
基金项目:国家自然科学基金资助项目(81702329); 陕西省重点研发计划项目(2023-YBSF-146)
更新日期/Last Update: 2023-11-06